Dell I15R-2105SLV Owner'S Manual Download

Page: 58 / 86

Thermal-Cooling

Assembly |

Replacing the Thermal-Cooling Assembly

Procedure

Align the screw holes on the thermal-cooling assembly with the screw holes on the
system board.

In sequential order (indicated on the thermal-cooling assembly), replace screws
that secure the thermal-cooling assembly to the system board.

Postrequisites

Follow the instructions from step 3 to step 10 in "Replacing the System Board" on
page 52.

Replace the palm rest. See "Replacing the Palm Rest" on page 31.

Replace the keyboard. See "Replacing the Keyboard" on page 16.

Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
page 26.

Follow the instructions from step 4 to step 6 in "Replacing the Hard Drive" on
page 23.

Replace the memory module(s). See "Replacing the Memory Module(s)" on
page 20.

Replace the base cover. See "Replacing the Base Cover" on page 18.

Replace the battery. See "Replacing the Battery" on page 13.

Follow the instructions in "After Working Inside Your Computer" on page 9.

Summary of Contents for I15R-2105SLV























































































Search results

Summary of Contents for I15R-2105SLV

Reviews:

Related manuals for I15R-2105SLV

Brands by name

Popular brands

Dell I15R-2105SLV, Owner'S Manual

Search results

Summary of Contents for I15R-2105SLV

Reviews:

Related manuals for I15R-2105SLV

Brands by name

Popular brands