Dell G5 5500, Service Manual, Page: 56 / 80

Steps
1. Align the screw holes on the power button with fingerprint reader with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x3) that secure the power button with fingerprint reader to the palm-rest and keyboard assembly.
Next steps
1. Install the system board .
2. Install the hard drive .
3. Install the power-adapter port .
4. Install the heat sink .
5. Install the right fan .
6. Install the WLAN card .
7. Install the solid-state drive/Intel Optane .
8. Install the battery .
9. Install the base cover .
10. Follow the procedure in After working inside your computer .
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the solid-state drive/Intel Optane .
5. Remove the WLAN card .
6. Remove the right fan .
7. Remove the heat sink .
8. Remove the hard drive .
9. Remove the display assembly .
56 Removing and installing components