Replacing the camera
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Procedure
1
Align the camera with the alignment posts on the display back-cover and antenna assembly and adhere the camera in place.
2
Connect the camera cable to the camera and close the latch to secure the cable.
Post-requisites
1
Replace the
2
Replace the
3
Replace the
.
4
Follow the procedure from step 7 to step 23 in
5
Replace the
.
6
Replace the
7
Replace the
.
8
Replace the
.
52
92
Replacing the camera
Summary of Contents for G5 15
