Dell G3 3590, Service Manual

Page: 52 / 77

4 Install the heat sink .
5 Install the left fan .
6 Install the right fan .
7 Install the WLAN card .
8 Install the solid-state drive/Intel Optane memory module .
9 Install the battery .
10 Install the base cover .
11 Follow the procedure in After working inside your computer .
Identifier GUID-4AAEA62D-3F30-4E6E-ADEC-AD46B79B8EA6
Status Released
Palm-rest and keyboard assembly
Identifier GUID-31169B40-7319-4910-98EC-40F9D3DD0D09
Status Released
Removing the palm-rest and keyboard assembly
Prerequisites
1 Follow the procedure in Before working inside your computer .
2 Remove the base cover .
3 Remove the battery .
4 Remove the memory modules .
5 Remove the WLAN card .
6 Remove the left fan .
7 Remove the right fan .
8 Remove the solid-state drive/Intel Optane memory module .
9 Remove the hard drive .
10 Remove the I/O board .
11 Remove the touchpad .
12 Remove the speakers .
13 Remove the display assembly .
14 Remove the power-adapter port .
15 Remove the system board .
NOTE: The system board can be removed with the heat sink attached.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
52 Removing and installing components