Dell G2422HS User Manual Download Page 7

Page: 7 / 59

About your monitor

│

Product features

The

Dell G2422HS

monitor has an active matrix, Thin-Film Transistor (TFT), Liquid

Crystal Display (LCD), and LED backlight. The monitor features include:

• 60.47 cm (23.80 in.) viewable area (measured diagonally).

• 1920 x 1080 (16:9) resolution, plus full-screen support for lower resolutions.

• NVIDIA

G-SYNC

Compatible Certification and AMD FreeSync™ Premium

Technology minimizes graphic distortions like screen tearing and stuttering for
smoother, fluid gameplay.

• Supports AMD FreeSync™ Premium, with a refresh rate of 165 Hz and a rapid

response time of 1 ms gray to gray in

Extreme

mode*.

• Color gamut of 99% sRGB.

• Digital connectivity with DisplayPort and HDMI.

• Enabled with gaming console VRR supportability.

• Tilt and height adjustment capabilities.

• Removable stand and Video Electronics Standards Association (VESA™)

100 mm mounting holes for flexible mounting solutions.

• Plug-and-play capability if supported by your system.

• On-Screen Display (OSD) adjustments for ease of setup and screen

optimization.

DisplayPort to DisplayPort 1.2
cable

HDMI 2.0 cable

• Quick Setup Guide

• Safety, Environmental, and

Regulatory Information

Summary of Contents for G2422HS




























































Search results

Summary of Contents for G2422HS

Reviews:

Brands by name

Popular brands

Dell G2422HS, User Manual

Search results

Summary of Contents for G2422HS

Reviews:

Brands by name

Popular brands