Dell G2422HS User Manual Download Page 20

20 

  About your monitor

Plug and Play capability

You can connect the monitor to any Plug and Play-compatible system. The monitor 
automatically provides the computer system with its Extended Display Identification 
Data (EDID) using Display Data Channel (DDC) protocols so that the system can 
configure itself and optimize the monitor settings. Most monitor installations are 
automatic; you can select different settings if desired. For more information about 
changing the monitor settings, see 

Operating the monitor

.

LCD monitor quality and pixel policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more 
pixels to become fixed in an unchanging state which are hard to see and do not 
affect the display quality or usability. For more information on Dell Monitor Quality 
and Pixel Policy, see 

www.dell.com/pixelguidelines

.

Ergonomics

CAUTION: Improper or prolonged usage of keyboard may result in 

injury.

CAUTION: Viewing the monitor screen for extended periods of time 

may result in eye strain.

For comfort and efficiency, observe the following guidelines when setting up and 
using your computer workstation: 

• Position your computer so that the monitor and keyboard are directly in front 

of you as you work. Special shelves are commercially available to help you 
correctly position your keyboard. 

• To reduce the risk of eye strain and neck/arm/back/shoulder pain from using 

the monitor for long periods of time, we suggest you to:

1. Set the distance of the screen between 20 to 28 in. (50 - 70 cm) from your 

eyes.

2. Blink frequently to moisten your eyes or wet your eyes with water after 

prolonged usage of the monitor.

3. Take regular and frequent breaks for 20 minutes every two hours.

4. Look away from your monitor and gaze at a distant object at 20 feet away 

for at least 20 seconds during the breaks.

5. Perform stretches to relieve tension in the neck, arm, back, and shoulders 

during the breaks.

• Make sure that the monitor screen is at eye level or slightly lower when you 

are sitting in front of the monitor.

Summary of Contents for G2422HS




























































Reviews: