Steps
1. Insert the ethernet and audio board at a 45 degree angle into the slot on the system board.
2. Align the screw holes on the ethernet and audio board with the screw holes on the system board.
3. Install the two screws (M2x4) that secure the ethernet and audio board to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
5. Install the
.
6. Install the
.
7. Install the
.
After working inside your computer
.
Power button
Removing the power button
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
NOTE:
System board can be removed with the fan and heat-sink assembly, ethernet and audio board, and USB board
attached.
Removing and installing components
47
