Steps
1. At an angle, slide the battery into the slot on the palm-rest and keyboard assembly.
2. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
3. Replace the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.
NOTE:
If you are replacing your old battery with the new battery, use the battery cable that came with the old battery.
If you want to replace the battery cable, the battery cable must be purchased separately.
4. Connect the battery cable to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Solid-state drives
Removing the solid-state drive
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
NOTE:
For more information about Dell qualified solid-state drives supported by your computer, see Parts & Accessories at
https://www.dell.com/support.
.
NOTE:
Flash (update) the BIOS before upgrading to a Gen4 solid-state drive.
The following image indicates the location of the solid-state drive 2230 and solid-state drive 2280 and provides a visual
representation of the removal procedure.
Removing and installing components
17
