Dell Force10 TeraScale C Series, Reference Manual

Page: 1293 / 1640

Security | 1293
Command Modes
EXEC Privilege
Command
History
Example Figure 51-4. show users Command Example
Table 1 describes the information in the
show users
command example.
Related
Commands
timeout login response
c e s
Specify how long the software will wait for login input (for example, user name and password) before
timing out.
Syntax timeout login response seconds
To return to the default values, enter
no timeout login response
.
Parameters
Defaults
see above
Command Modes
LINE
Command
History
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Table 1 show users Command Example Fields
Field Description
(untitled) Indicates with a * which terminal line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
FTOS#show user
Line User Host(s) Location
0 console 0 admin idle
* 3 vty 1 admin idle 172.31.1.4
FTOS#
username Enable a user.
seconds
Enter a number of seconds the software will wait before logging you out.
Range:
VTY : 1 to 30 seconds, default: 30 seconds.
Console : 1 to 300 seconds, default: 0 seconds (no timeout).
AUX : 1 to 300 seconds, default: 0 seconds (no timeout).
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series