20
Installing the Software
Configure a Username and Password
In FTOS, you can assign a specific username to limit user access to the system.
Configure the Enable Password
The EXEC Privilege mode is accessed by the
enable
command. Configure a
password as a basic security measure. When using a console connection, EXEC
Privilege mode is unrestricted by default; it cannot be reached by a VTY
connection if no password is configured. There are two types of enable
passwords:
•
enable password stores the password in the running/startup configuration
using a DES encryption method.
•
enable secret is stored in the running/startup configuration in using a
stronger, MD5 encryption method.
Dell Force10 recommends using the enable secret password.
Task
Command Syntax
Command Mode
Configure a
management route to
the network from
which you are
accessing the system.
management route
ip-address/mask
gateway
CONFIGURATION
Task
Command Syntax
Command Mode
Configure a username
and password to
access the system
remotely.
username
name
[
access-class
access-list-
name
] [
nopassword | password
[
encryption-type
]
password
] [
privilege
level
]
CONFIGURATION
Task
Command Syntax
Command Mode
Create a password to
access EXEC
Privilege mode.
enable [password | secret] [level
level
]
[
encryption-type
]
password
CONFIGURATION
Summary of Contents for Force10 S25 Series
