Installing the S25P System
5
This guide provides site preparation recommendations, step-by-step procedures for rack mounting and
desk mounting, inserting optional modules, and connecting to a power source.
After you have completed the hardware installation and power-up of the S25P, refer to the
SFTOS™
Configuration Guide
for software configuration information and the
SFTOS™ Command Reference
for
detailed Command Line Interface (CLI) information.
Information Symbols and Warnings
The following graphic symbols are used in this document to bring attention to hazards that exist when
handling the S25P and its components. Please read these alerts and heed their warnings and cautions.
Table 1
describes symbols contained in this guide.
Preface
About this Guide
Table 1
Information Symbols
Symbol
Warning
Description
Danger
This symbol warns that improper handling and installation could result in bodily injury.
Before you begin work on this equipment, be aware of hazards involving electrical circuitry,
networking environments, and instigate accident prevention procedures.
Caution
This symbol informs you that improper handling and installation could result in equipment
damage or loss of data.
Warning
This symbol informs you that improper handling may reduce your component or system
performance.
Note
This symbol informs you of important operational information.
Danger:
The installation of this equipment shall be performed by trained and qualified personnel only.
Read this guide before installing and powering up this equipment. This equipment contains two power
cords. Disconnect both power cords before servicing.
Summary of Contents for Force10 S25-01-GE-24P
Page 1: ...Installing the S25P System December 15 2008 100 00058 02 ...
Page 44: ...44 ...
