3
Replacing or Adding a Disk Module
3-13
Servicing and Upgrading a DPE
3. Close and lock the front door as shown below.
Figure 3-6
Closing and Locking the Front Door
B.
If desired, lock the door as follows:
Insert the key in the door’s latch.
Turn the key 180o counterclockwise.
Remove the key, if desired.
A.
Raise the door until
it latches into place.
Latch
To lock, turn key 180o
counterclockwise.
Latch
Key
Summary of Contents for FC4500
Page 4: ...EMC Fibre Channel Disk Array Processor Enclosure DPE Hardware Reference iv ...
Page 10: ...x EMC Fibre Channel Disk Array Processor Enclosure DPE Hardware Reference Tables ...
Page 104: ...g 6 EMC Fibre Channel Disk Array Processor Enclosure DPE Hardware Reference Glossary ...
Page 110: ...EMC Fibre Channel Disk Array Processor Enclosure DPE Hardware Reference i 6 Index ...