Figure 48. Removing the M.2 riser
NOTE:
XC Core does not use the SATA cable version.
Next steps
.
Installing the M.2 riser
Prerequisites
●
Follow the safety guidelines listed in
.
●
Follow the procedure listed in
Before working inside your system
●
.
Steps
1. Align the M.2 riser with the stand off on the system board and insert it firmly until the riser is fully seated in the slot.
2. Using a Phillips #2 screwdriver, tighten the screw that secures the riser to the chassis.
48
Installing and removing system components
