manualshive.com logo in svg

Dell EMC PowerEdge T640, Installation And Service Manual

Share
Download
Dell EMC PowerEdge T640 Installation And Service Manual Download Page 5

Power supply units...........................................................................................................................................................82

Hot spare feature....................................................................................................................................................... 83
Removing a power supply unit blank....................................................................................................................... 83
Installing a power supply unit blank......................................................................................................................... 84
Removing a power supply unit................................................................................................................................. 84
Installing a power supply unit....................................................................................................................................85
Removing a DC power supply unit...........................................................................................................................86
Installing DC power supply unit................................................................................................................................ 87
Wiring instructions for a DC power supply unit......................................................................................................87

System cover....................................................................................................................................................................89

Removing the system cover.....................................................................................................................................89
Installing the system cover....................................................................................................................................... 90

Air shroud..........................................................................................................................................................................90

Removing the optional GPU air shrouds.................................................................................................................90
Installing the optional GPU air shrouds.................................................................................................................... 91
Removing the air shroud........................................................................................................................................... 92
Installing the air shroud............................................................................................................................................. 93

Cooling fans...................................................................................................................................................................... 94

Removing a cooling fan.............................................................................................................................................95
Installing a cooling fan............................................................................................................................................... 96
Removing the right external fan.............................................................................................................................. 96
Installing the right external fan................................................................................................................................. 97

Cooling fan assembly.......................................................................................................................................................98

Removing the cooling fan assembly........................................................................................................................ 98
Installing the cooling fan assembly.......................................................................................................................... 99

Flex bays..........................................................................................................................................................................100

Removing a NVMe drive bay or flex bay............................................................................................................... 100
Installing a NVMe drive bay or flex bay.................................................................................................................. 101

Optical drives and tape drives.......................................................................................................................................102

Removing the optical or tape drive blank.............................................................................................................. 102
Installing the optical or tape drive blank................................................................................................................ 103
Removing the optical drive cage or tape drive.....................................................................................................104
Installing the optical drive cage or tape drive....................................................................................................... 105
Removing the slim optical drive..............................................................................................................................106
Installing the slim optical drive.................................................................................................................................107

System memory..............................................................................................................................................................108

General memory module installation guidelines..................................................................................................... 110
Mode-specific guidelines..........................................................................................................................................110
Removing a memory module................................................................................................................................... 112
Installing a memory module......................................................................................................................................113

Processors and heat sinks..............................................................................................................................................115

Removing a processor and heat sink module........................................................................................................ 115
Removing the processor from the processor and heat sink module.................................................................. 117
Installing the processor into a processor and heat sink module.......................................................................... 118
Installing a processor and heat sink module...........................................................................................................121

Contents

5

Summary of Contents for EMC PowerEdge T640





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands