Figure 74. Installing the heat sink onto the processor
Next steps
1.
Install the processor and heat sink module
.
2.
.
3. Follow the procedure listed in
After working inside the system
Installing the processor heat sink module
Prerequisites
Never remove the heat sink from a processor unless you intend to replace the processor or system board. The heat sink is
necessary to maintain proper thermal conditions.
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3.
.
4. If installed, remove the processor dust cover.
Steps
1. Align the pin 1 indicator of the processor heat sink module (PHM) to the system board and then place the processor heat
sink module (PHM) on the processor socket.
CAUTION:
To avoid damaging the fins on the heat sink, do not press down on the heat sink fins.
NOTE:
Ensure that the processor heat sink module (PHM) is held parallel to the system board to prevent damaging the
components.
Installing and removing system components
79
