![Dell EMC Core XC750 Installation And Service Manual Download Page 12](http://html.mh-extra.com/html/dell/emc-core-xc750/emc-core-xc750_installation-and-service-manual_85118012.webp)
Table 5. Rear view of the system (continued)
Item
Ports, panels, or slots
Icon
Description
that are supported on your system, see the
section.
2
BOSS S2 module
(optional)
N/A
This slot supports the BOSS S2 module.
3
Rear handle
N/A
To lift the system.
4
PCIe expansion card riser
2 (slot 3 and slot 6)
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
5
PCIe expansion card riser
3 (slot 4 and slot 5)
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
6
USB 2.0 port (1)
This port is USB 2.0-compliant.
7
PCIe expansion card riser
4 (slot 7 and slot 8)
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
8
Power supply unit (PSU
2)
For more information about the PSU configurations, see the
XC Core
XC750 Technical Specifications
on product documentation page.
9
VGA port
For more information about the VGA, see the
Dell EMC XC Core
XC750 Technical Specifications
on product documentation page.
10
USB 3.0 port (1)
This port is USB 3.0-compliant.
11
iDRAC dedicated port
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at
.
12
System identification
button
Press the system ID button:
●
To locate a particular system within a rack.
●
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16 s.
NOTE:
●
To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
●
If the system stops responding during POST, press and hold
the system ID button (for more than 5 s) to enter the BIOS
progress mode.
13
OCP NIC port (optional)
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
14
NIC port (1,2)
The NIC ports are embedded on the LOM card that is connected to
the system board.
15
Power supply unit (PSU 1)
For more information about the PSU configurations, see the
Dell EMC XC Core XC750 Technical Specifications
on product
documentation page.
12
System overview