Dell Edge 3001, Installation And Operation Manual, Page: 21 / 70

N NOTE: Shut down your system before you change the power sources.
11. Replace the dust caps on any unused ports.
12. When setting up the Edge Gateway for the first time, complete the operating system setup. For more information, see Setting
up your operating system .
NOTE: MAC addresses and the IMEI number are available on the label at the front of the Edge Gateway. Remove the
label at install.
NOTE: The Edge Gateway is shipped with Windows 10 IoT Enterprise LTSB 2016 or Ubuntu Core 16 operating
system.
NOTE: The default user name and password for Windows 10 IoT Enterprise LTSB 2016 is admin .
NOTE: The default user name and password for Ubuntu Core 16 is admin .
13. Access the BIOS by connecting remotely with the Dell Command | Configure application.
Accessing Dell Command | Configure on Windows 10 IOT Enterprise LTSB 2016
Click Start
ĺ
All Programs
ĺ
Dell
ĺ
Command Configure
ĺ
Dell Command | Configure Wizard .
Accessing Dell Command | Configure on Ubuntu Core 16
On the systems running Ubuntu Core 16, Dell Command | Configure can be accessed from any location using the command
GFFFFWN
.
NOTE: For more information about using the Dell Command | Configure application, see the Dell Command |
Configure Installation Guide and User's Guide at www.dell.com/dellclientcommandsuitemanuals .
NOTE: For more information about BIOS settings on the Edge Gateway, see Default BIOS settings .
14. Install the Edge Gateway using one of the following mounting options:
NOTE: An open space of 63.50 mm (2.50 in) is recommended around the Edge Gateway for optimal air circulation.
• Standard mount
• DIN rail mount
• Quick mount
• Perpendicular mount
• Cable control bar
21