NOTE:
The procedure to install a 2.5-inch or a 3.5-inch drive are the same.
Figure 31. Installing a drive carrier
Next steps
1.
2. Follow the procedure listed in
After working inside your system
Removing the drive from the drive carrier
Prerequisites
1. Follow the safety guidelines listed in
.
CAUTION:
Mixing drive carriers from previous generations of PowerEdge servers is not supported.
2. Follow the procedure listed in
Before working inside your system
3.
4.
Steps
1. Using a Phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
2. Lift the drive out of the drive carrier.
Installing and removing system components
55