On Screen Menu/Display (OSD)
Direct-Access Functions
A
MENU
The 'MENU' button is used to open the on-screen display (OSD), select function icons, exit from menus and sub-menus, and
to exit the OSD. See
Accessing the Menu System.
B
Brightness/Contrast Hot
Key
Use this button for direct access to the '
Brightness
' and '
Contrast
' control menu.
B
C
- and + buttons
Use these buttons to adjust (decrease/increase ranges) items in the OSD.
NOTE:
You can activate automatic scroll feature by pressing and holding or - button.
C
Auto Adjust
Use this button to activate automatic setup and adjustment. The following dialog will appear on screen as the monitor self-
adjusts to the current input:
Auto Adjustment
button allows the monitor to self-adjust to the incoming video signal. After using 'Auto Adjustment',
you can further tune your monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD.
Auto Adjust In Progress
NOTE:
Auto Adjust will not occur if you press the button while there are no active video
input signals, or attached cables.
D
Power Button & Indicator
The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
The Power button turns the monitor on and off.
Function
Adjustment Method
Auto adjustment
Use this button to activate automatic setup and adjustment. The following dialog will appear on
screen as the monitor self-
adjusts to the current input:
Auto Adjustment
button allows the monitor to self-adjust to the incoming video signal. After
using
Auto Adjustment
, you can further tune your monitor by using the
Pixel Clock
and
Phase
controls in the OSD.
Auto Adjust In Progress
NOTE:
Auto Adjust will not occur if you press the button while there are no active video input
signals, or attached cables.
Brightness / Contrast
With the menu off, push
button to display the 'Brightness' and 'Contrast' adjustment menu.
The
Brightness
function adjusts the luminance of the flat panel.
Adjust 'Brightness' first, then adjust 'Contrast' only if further adjustment is necessary.
"+" increase 'brightness'
" - "decrease 'brightness'
The
Contrast
function adjusts the degree of difference between darkness and lightness on the
display screen.
"+" increase the 'contrast'
"-" decrease the 'contrast'
Downloaded from ManualMonitor.com Manuals
