Back to Contents Page
Setting Up the Monitor
Dell™
E1909WDD Flat Panel Monitor User's Guide
Attaching the Stand
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Removing the Stand
Wall Mounting (Optional)
Attaching the Base
To attach the base of the stand:
1.
Place the stand on a flat surface.
2.
Fit the groove on the back of the monitor onto the two teeth of the upper stand.
3.
Lower the monitor so that the monitor mounting area snaps on/lock to stand
Connecting Your Monitor
To connect your monitor to the computer:
1.
Turn off your computer and disconnect the power cable.
2.
Connect the monitor to the computer.
Connecting the Monitor
NOTE:
The stand is detached when the monitor is shipped from the factory.
CAUTION:
Before you begin any of the procedures in this section, follow the
Safety Instructions
.
