Great user manuals database on
Setting Up the Monitor
Dell™ E170S/E190S Flat Panel Monitor
User's Guide
Attaching the Soundbar (Optional)
Attaching the Stand
Remove the monitor cover and place the monitor on it.
1.
Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.
2.
Lower the stand so that the monitor mounting area snaps onto the stand.
Connecting Your Monitor
To connect your monitor to the computer perform the following steps/instructions:
1.
Turn off your computer and disconnect the power cable.
2.
Connect the blue (analog VGA) display connector cable to the corresponding video connector on the back of your computer.
Connecting the blue VGA cable
After you have completed connecting the VGA cable, follow the procedure below to complete your monitor setup:
NOTE: Stand is detached when the monitor is shipped from the factory.
CAUTION:
Before you begin any of the procedures in this section, follow the
NOTE:
The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary.
