Figure 25. Removing a 2.5-inch hard drive from a 3.5-inch hard drive adapter
1
3.5-inch hard drive adapter
2
screw (2)
3
2.5-inch hard drive
Next step
Install a 2.5-inch hard drive into a 3.5-inch hard drive adapter.
Related links
Removing a 3.5-inch hard drive adapter from a 3.5-inch hot swappable hard drive carrier
Safety instructions
Removing a 3.5-inch hard drive adapter from a 3.5-inch hot
swappable hard drive carrier
Prerequisites
1
Follow the safety guidelines listed in the Safety instructions section.
2
Keep the Phillips #2 screwdriver ready.
3
Remove the 3.5-inch hot swappable hard drive carrier from the system.
Steps
1
Remove the screws from the rails on the 3.5-inch hot swappable hard drive carrier.
2
Lift the 3.5-inch hard drive adapter out of the 3.5-inch hot swappable hard drive carrier.
Next step
Remove the 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter.
Related links
Safety instructions
Removing a hot swappable hard drive carrier
74
Installing and removing system components
