Figure 18. Removing the memory module
1
memory module
2
memory module socket
3
memory module socket ejector (2)
Next steps
1
Install the memory module.
NOTE:
If you are removing the memory module permanently, install a memory module blank.
2
If removed, install the PCIe expansion card riser.
3
If disconnected, reconnect the cables to the expansion card(s).
4
Install the cooling shroud.
5
If closed, open the expansion card latch on the cooling shroud to support the full length expansion card.
Related links
Safety instructions
System Setup
Before working inside your system
Removing the cooling shroud
Removing the dual riser module (optional)
Removing the internal PERC riser
Installing memory modules
Installing the internal PERC riser
Installing the dual riser module (optional)
Installing the cooling shroud
After working inside your system
Installing memory modules
1
Locate the appropriate memory module socket.
2
Open the ejectors on the memory module socket outward to allow the memory module to be inserted into the socket.
Installing and removing system components
67
