background image

support.dell.com

Dell Dimension Systems Setup Guide

5

7.

A modem preparation window appears that allows you to connect to Microsoft 
and register your operating system. Click 

Skip

 and then click 

Yes

 and proceed to 

step 9, or enter the requested information and click 

Next

A registration progress window appears while your modem connects to 
Microsoft. 

8.

To send the registration information to Microsoft, enter the requested 
information in the 

Registration

 

Confirmation

 window and click 

Next

. If you do 

not want the information sent, uncheck the 

Please, send the information on 

this screen to Microsoft

 box and click 

Next

9.

Read the license agreement, click 

I accept the Agreement

, and then click 

Next

.

You must accept the agreement to be able to access Windows 98 Second 
Edition. 

10. If you ordered DellNet™ Internet service, click 

Next

 and proceed to the next 

step. 

If a screen appears that prompts you to set up your Internet access or provides 
information about how to connect to the Internet, follow the instructions that 
appear on the screen or click 

Skip

 to bypass Internet setup and information. 

If no prompt appears, proceed to the next step.

11. If an animated tutorial starts and introduces you to your computer and the 

Microsoft products installed on it, watch the tutorial and then click 

Next

12. Click 

Finish

.

13. If the 

Date/Time Properties

 window shows the correct time and date for your 

area, click 

Close

. Otherwise, enter the correct time and date, click 

Apply

, and 

then click 

OK

Windows 98 Second Edition is now set up and the Windows desktop appears on 
the screen. 

14. If the IntelliMouse 

Productivity Tips

 window is open on the Windows desktop, 

read the window’s contents. Click the 

Show Tips at Windows Startup

 box to 

uncheck it, and then close the window by clicking the 

X

 in the upper-right corner.

Depending on the options that you purchased with your computer, you 

may 

have a 

Complete Dell Setup

 icon on the Windows desktop (see Figure 1). 

Summary of Contents for Dimension 9558P















Reviews: