background image

2

Dell Dimension Systems Setup Guide

To complete the initial setup of Windows Me, perform the following steps:

1.

Turn on your computer. 

The 

Welcome to Microsoft Windows 

screen

 

appears. 

2.

Click 

Next

.

The 

Select Your System Settings 

window appears. Click your region, preferred 

language, and keyboard.

3.

Click 

Next.

The 

Select Your Time Zone 

window appears. 

4.

Click your time zone and click 

Next

.

The 

End User License Agreement 

window appears. It is important that you read 

and understand both license agreements. You must accept the agreements to 
proceed with the setup of your system.

5.

Click 

Yes.

 

I accept this agreement 

both places it appears in the window and 

click 

Next

. If your computer has an internal modem, go to step 6. Otherwise, go 

to step 7.

6.

When the 

Register with Microsoft

 window appears, if you want to register 

online, click 

Yes, I want to register online

, click 

Next

, follow the screen 

prompts, and fill in the appropriate information. If you do not want to register 
online, click 

No, I do not want to register at this time

, click 

Next

, and go to 

step 6.

7.

When the 

Thank You!

 window appears, click 

Finish

 to begin working with 

Windows Me.

Microsoft Windows 2000 Professional

The initial setup of the Windows 2000 Professional operating system may take 
approximately 7 minutes. Additional setup time may be required, depending on your 
system’s internal and external devices.

To set up Windows 2000 Professional for your system, perform the following steps:

1.

Turn on your computer. 

The 

Software Licenses 

screen

 

appears.

2.

Read the license agreements and press any key if you accept the agreements.

You must accept the agreements to proceed with the setup.

3.

At the 

Important Technical Support Information 

screen, press any key to 

continue.

Your system restarts and the 

Windows 2000 Professional Setup License 

Agreement 

window appears. 

Summary of Contents for Dimension 9558P















Reviews: