Dell Dimension 9150 Service Manual Download Page 63

Page: 63 / 69

Removing and Installing Parts: Dell Dimension 9150 Service Manual

file:///T|/htdocs/systems/dim9150/en/sm/parts.htm[10/31/2012 7:59:36 AM]

b. Set the retention mechanism aside in a secure location.

4. Use a long Phillips screwdriver to loosen the two captive screws on each side of the heat-sink assembly.

CAUTION:

Despite having a plastic shield, the heat-sink assembly may be very hot during normal

operation. Be sure that it has had sufficient time to cool before you touch it.

5. Rotate the heat-sink assembly towards the rear of the computer, and remove it from the computer.

1 heat sink and fan shroud assembly
2 captive screw housing (2)

6. Place the heat-sink assembly on its side in a safe place.

7. Disconnect the system fan cable from the system board.

8. Ensure that all cables have been removed from the routing clips on the top of the system fan assembly.

Summary of Contents for Dimension 9150






































































Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands

Dell Dimension 9150, Service Manual

Search results

Summary of Contents for Dimension 9150

Reviews:

Related manuals for Dimension 9150

Brands by name

Popular brands