See the documentation that came with the card for information on configuring the card, making internal connections, or
otherwise customizing it for your computer.
CAUTION:
Some network adapters automatically start the computer when they are connected to a
network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet
before installing any cards.
8. If you are installing the card into the x16 card connector, position the card so the securing slot is aligned with the
securing tab, and gently pull the securing tab.
NOTICE:
Ensure that you release the securing tab to unseat the card. If the card is not removed correctly, the system
board may be damaged.
9. Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
1 bracket within slot
4 alignment guide
2 bracket caught outside of slot 5 fully seated card
3 alignment bar
6 not fully seated card
10. If you replaced a card that was already installed in the computer and you removed the retention mechanism, you may
reinstall the retention mechanism.
11. Before replacing the card retention mechanism, ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
The notch in the top of the card or filler bracket fits around the alignment guide.
12. Snap the card retention mechanism into place, securing the x16 PCI card.