Steps
1. Insert the slim ODD assembly into the ODD slot.
2. Slide the slim ODD assembly until it snaps into place.
3. Route the power cable and data cable through the routing guides and connect the cables to the slim ODD.
Next steps
1. Install the
2. Install the
.
after working inside your computer
.
Slim optical-drive bracket
Removing the slim-ODD bracket
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
4. Remove the
.
About this task
The following images indicate the location of the slim-ODD bracket and provides a visual representation of the removal
procedure.
Removing and installing components
43
Summary of Contents for D29M
