Dell D15S, Service Manual

Page: 75 / 91

Table 17. Storage (continued)
Options Description
Enable SMART Reporting
This section contains a toggle switch that allows the user
to enable or disable the S.M.A.R.T(Self-Monitoring, Analysis,
and Reporting Technology) option on the system (OFF by
default).
Drive Information
This section provides information about the connected and
active drives on the computer. The following options are
available:
● M.2 PCIe SSD-0
○ Type
○ Device
Enable MediaCard
This section allows setting the media cards ON/OFF or
enable/disable media card in read-only state. The following
options are available:
● Secure Digital (SD) Card (Enabled by default)
● Secure Digital (SD) Card Read-Only Mode
Display
This section provides display details and settings.
Table 18. Display
Options Description
Multi-Display
This section contains a toggle switch which allows the user
to enable/disable Multi-Display. (disabled by default). This
feature is only supported on Windows 7 and above.
Primary Display
Video Primary Display
This section allows the user to select the video controller
for the primary display when multiple video controllers are
detected. The options are:
● Auto (Selected by default)
●
Onboard Video
Full Screen Logo
Full Screen Logo
This section contains a toggle switch which allows the user to
enable/disable the option to view a full screen logo (disabled
by default).
Connection
This section provides connection details and settings.
Table 19. Connection
Options Description
Network Controller Configuration
Integrated NIC
This section allows the user to change the on-board LAN
controller options. The options are as follows:
System setup 75