Dell CLARiiON DAE2, Hardware Reference Manual

Page: 48 / 78

3-10
2-Gigabit Disk-Array Enclosure (DAE2) Hardware Reference
Servicing a DAE2
Unlocking and Removing the Front Bezel
Follow these steps to remove the front bezel and gain access to the
disk modules. Refer to Figure 3-5.
1. Insert the key that shipped with your enclosure into the bezel
lock, and turn it to release the lock.
2. Press the two latch buttons on the bezel surface toward each other
to release the bezel from the cabinet.
3. Pull the bezel off the cabinet and put it on a clean, static-free
surface.
Figure 3-5
Unlocking and Removing the Front Bezel
If you are adding a new disk module, continue to the disk filler
module removal procedure that follows. If you are replacing a faulty
disk module, proceed to the disk module removal procedure.
EMC2173