Dell C9000 series, Reference Manual

Page: 1096 / 2286

Command Modes CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.8.1.0 Introduced.
net
To configure an IS-IS network entity title (NET) for a routing process, use this mandatory command. If you did
not configure a NET, the IS-IS process does not start.
C9000 Series
Syntax
net network-entity-title
To remove a net, use the
no net network-entity-title
command.
Parameters
network-entity-
title Specify the area address and system ID for an IS-IS routing
process. The first 1 to 13 bytes identify the area address. The
next 6 bytes identify the system ID. The last 1 byte is the selector
byte, always identified as zero zero (00). This argument can be
applied to an address or a name.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Intermediate System to Intermediate System (IS-IS) 1096