3.
Tighten the screw to secure the battery to the computer.
4.
Install the
Base Cover
.
5.
Follow the procedures in
After Working Inside Your computer
.
Removing the Hard Drive
1.
Follow the procedures in
Before Working Inside Your Computer
..
2.
Remove:
a.
Base Cover
b.
Battery
3.
Perform the following steps as shown in the illustration:
a. Loosen the screw that secures the hard drive to the computer [1].
b. Lift the hard drive partially at a 45–degree angle [2].
c. Slide the hard drive [3].
4.
Perform the following steps as shown in the illustration:
a. Disconnect the hard drive cable and slide the hard drive [1].
b. Lift the hard drive from the computer [2].
11