Steps
1. Place the keyboard-bracket on the keyboard.
2. Align the screw holes on the keyboard bracket with the screw holes on the keyboard.
3. Replace the 30 screws (M1.2x2) that secure the keyboard bracket to the keyboard.
4. Move the antenna cables over the palm-rest and keyboard assembly.
5. Adhere the tapes that secure the antenna cables to the palm-rest and keyboard assembly.
6. Move the keyboard cable over the keyboard.
7. Connect the keyboard cable to the keyboard and close the latch.
8. Adhere the power-button cable to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
.
5. Install the
6. Install the
.
7. Install the
.
8. Install the
9. Install the
10. Install the
.
11. Install the
.
12. Install the
.
13. Install the
14. Install the
.
15. Install the
.
16. Install the
.
After working inside your computer
.
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
.
10. Remove the
11. Remove the
.
12. Remove the
.
13. Remove the
.
14. Remove the
.
15. Remove the
NOTE:
The system board can be removed and installed along with the heat sink, memory and solid-state drives. This
simplifies the removal and installation procedure and avoids breaking the thermal bond between the system board and
heat sink.
16. Remove the
.
Removing and installing components
67
Summary of Contents for Alienware x17 R1
