After Working Inside Your
Alienware Graphics Amplifier
CAUTION: Leaving stray or loose screws inside your device may
severely damage your device.
1
Replace all screws and make sure that no stray screws remain inside your
device.
2
Connect any external devices, peripherals, and cables you removed
before working on your device.
3
Replace any media cards, discs, and any other part(s) that you removed
before working on your device.
4
Connect your device and all attached devices to their electrical outlets.
5
Turn on your device.
7
Summary of Contents for Alienware Graphics Amplifier
