manualshive.com logo in svg

Dell Alienware AW2518H, User Manual

Share
Download
Dell Alienware AW2518H User Manual Download Page 34

34 | Operating the Monitor

ULMB

ULMB

 (Ultra Low Motion Blur) helps have less of a motion 

blur effect while you are watching fast-moving images. When 
the graphics card supports G-SYNC, make sure that the 
Enable G-SYNC function is not selected in the NVIDIA 

Control Panel, 

ULMB

 will be automatically enabled.

NOTE: 

This function is available when the refresh rate is 

100 Hz, 120 Hz or 144 Hz.

NOTE: 

When ULMB is enabled, the message of ULMB Mode 

is displayed on the lower-left corner of the OSD. When 

G-

SYNC

 is enabled in the NVIDIA Control Panel, the message 

of G-SYNC Mode is displayed instead. If your system doesn’t 
support G-SYNC, then the message of Normal Mode is 
displayed. 

ULMB Pulse 

Width

Allows you to adjust the panel's backlight a bit, so as to reduce 
motion blur. Use 

 or 

 to adjust the level from 10 to 100. 

Smaller values decrease motion blur and brightness.

Dark Stabilizer

The feature improves the visibility in the dark gaming 

scenarios. The higher the value (between 0 to 3), the better 

visibility in dark area of the display image.

Reset Game

Select this option to restore default game settings.

Summary of Contents for Alienware AW2518H




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands