background image

62

CHAPTER 7: SPECIFICATIONS 

Computer Environment

Temperature ranges:

Operating

10°C to 35°C (50°F to 95°F)

Storage

–10°C to 45°C (14°F to 113°F) 

Relative humidity (maximum)

20% to 80% (noncondensing)

Maximum  vibration  (using  a  random-vibration  spectrum  that  simulates  user 

environment):

Operating

0.25 GRMS 

Non-Operating

2.2 GRMS

Maximum shock (measured with hard drive in head-parked position and a 2-ms 

half-sine pulse):

Operating

40 G for 2 ms with a change in velocity of 

20 in/s (51 cm/s)

Non-Operating

50 G for 26 ms with a change in velocity 

of 320 in/s (813 cm/s)

Altitude (maximum):

Operating

–15.2 to 3048 m  

(–50 to 10,000 ft)

Storage

–15.2 to 10,668 m  

(–50 to 35,000 ft)

Airborne contaminant level

G2 or lower as defined by ISA-S71.04-1985

Expansion Bus

PCI Express x1:

Connectors

two

Connector size

36-pin connectors

PCI Express x16:

Connectors

two

Connector size

164 pins connectors

Audio

Type

integrated 7.1 channel, High Definition Audio 

with S/PDIF support

Controller

Realtek ALC892 codec

Video

Type

up to two graphic adapters - double-width, full 

length PCI Express x16

Operating speed

x16 with a single x16 video card 

x8/x8 with dual x16 video cards

Power

Voltage

100-240V AC

NOTE: 

For information on voltage settings, see the safety information shipped 

with your computer.

Summary of Contents for Alienware Aurora R3







































































Reviews: