Installing the CPU fan
1
Attach the four rubber grommets of the CPU fan to the fan bracket.
2
Place the CPU fan to its position on the heat sink.
3
Route the fan cable to its holder in the fan bracket.
4
Replace the 4 screws securing the heat sink and the CPU fan.
5
Install the:
a
heat sink and CPU fan assembly
b
c
6
Follow the procedure in
After working inside your computer
.
Processor
Removing the processor
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
heat sink and CPU fan assembly
3
To remove the processor:
a Press the left side release lever [1] down, then move it inward to release it from the retention hook.
b Press the right side release lever [2] down, then move it inward to release it from the retention hook.
c Open the release lever [3, 4] to unlock the processor cover.
d Raise the processor cover [5].
e Lift the processor [6] to remove it from the socket and place it into anti-static packaging.
Removing and installing components
49
Summary of Contents for 5820
Page 1: ...Dell Precision 5820 Tower Owner s Manual Regulatory Model D02T Regulatory Type D02T002 ...
Page 21: ...b Slide the slim ODD out of the system Removing and installing components 21 ...
Page 23: ...b Lift the bezel from the chassis Removing and installing components 23 ...
