Dell 5130cn, Service Manual

Page: 38 / 136

3 - 24
Chapter 3 Removal and Replacement Procedures (RRPs)
Finisher Service Manual
Version 2 2009.06.10
Removal 10 COVER REAR (PL14.3.3)
In the following steps, the details of Steps 1 and 2 are omitted because they are described earlier in this
chapter. Go to the steps in parentheses to execute the necessary steps, and then go to Step 3 onward.
1) Remove the TRAY STACKER. (Removal 1)
2) Remove the FINISHER ASSY. (Removal 2)
3) Remove the clamp that fixes the HARNESS ASSY IF A4FIN (PL14.11.7) to the COVER REAR
(PL14.3.3).
4) Remove the four screws (silver, flanged, 8mm) that fix the COVER REAR (PL14.3.3) to the FIN-
ISHER ASSY.
5) Remove the COVER REAR from the FINISHER ASSY.
Go to the next removal step:
Removal 11 PWBA MAIN A4FIN (PL14.4.12)
Tbt03516KB
4)
4)
4)
5)
4)
3)-1 3)-1
3)-2