background image

Introduction

3-DNS

® 

Administrator Guide

1 - 11

Finding help and technical support resources

You can find additional technical documentation about the 3-DNS 
Controller in the following locations:

Release notes

Release notes for the 3-DNS Controller are available from the home 
screen of the Configuration utility. The release note contains the latest 
information for the current version, including a list of new features and 
enhancements, a list of fixes, and a list of known issues.

Online help for 3-DNS features

You can find help online in three different locations:

• The Configuration utility home screen has PDF versions of the guides 

included in the Administrator Kit. 3-DNS software upgrades may 
replace the guides with updated versions as appropriate.

• The Configuration utility has online help for each screen. Click the 

Help

 button on the toolbar. 

• Individual commands have online help, including command syntax 

and examples, in standard UNIX man page format. Type the 
command followed by 

-h 

or 

-help

, and the 3-DNS Controller displays 

the syntax and usage associated with the command. You can also type 

man <command>

 to display the man page for the command.

Third-party documentation for software add-ons

The Configuration utility contains online documentation for the 
third-party software included with the 3-DNS Controller, including the 
NameSurfer application.

Technical support through the World Wide Web

The Dell Support website at 

support.dell.com

 provides the latest 

technical documentation. 

Note

All references to hardware platforms in this guide refer specifically to 
systems supplied by F5 Networks, Inc. If your hardware was supplied by 
another vendor and you have hardware-related questions, please refer to 
the documentation from that vendor.

Summary of Contents for 3-DNS






































































































































































Reviews: