General
Performance
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the
user can select different settings, but in most cases monitor installation is automatic.
Maintenance Guidelines
Caring for Your Monitor
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
l
To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
l
Use a lightly-
dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
l
If you notice a white powder when you unpack your monitor, wipe it off with a cloth.
l
Handle your monitor with care as dark
-colored monitors may scratch and show white scuff marks more than lighter-
colored monitors.
Back to Contents Page
SmartMedia
™
Logical Format Specifications
1.30
xD
xD Picture Card Specification
1.2
2GB
Supported
SD
SD Memory Card Specifications
2.0
32GB
Supported
MMC
MultiMedia Card System Specification
4.2
32GB
Supported
NOTE: MSPRO includes MSPRO Duo and MS Micro.
NOTE: xD includes TypeM and TypeH.
NOTE: SD includes HS-SD, MiniSD and SD Micro. SD v2.0 spec includes SDHC.
NOTE: MMC includes MMCPlus, RS-MMC, MMC Mobile and MMC micro.
Connection type
USB 2.0 High Speed Device (USB Full Speed Device compatible)
Supported OS
Microsoft
®
Windows
®
2000, Windows
®
XP and Windows Vista
®
Transfer Speed
Read: 480 Mb/s (max.)
Write: 480 Mb/s (max.)
CAUTION:
Read and follow the
Safety Instructions
before cleaning the monitor.
CAUTION:
Before cleaning the monitor, unplug the monitor from the electrical
outlet.
