or
If it finds a cable connection with the computer, then it looks for activated VGA/DVI-D port on the computer and makes the
selection for that port.
NOTE:
If S-video/Composite video /Component video (Y Pb Pr) cable is not connected or the video source is turned off, the
screen will be turned off, when any button except power button is pressed. The monitor displays "No Input Signal" for the
corresponding connection .
B
PIP/PBP Select
PIP Settings:
Use this button to activate PIP (Picture-in-Picture)/PBP (Picture-by-Picture) mode adjustment.
Pressing this button continually will cycle the sub-screen through the PIP -> PBP -> OFF (Original state without sub-screen) modes
with the corresponding brief OSD menu.
Pressing PIP/PBP
for the first time in sequence (PIP) will open "PIP Setting" Menu.
The details of the menu is as follows:
- PIP Source : To select an input signal for PIP. (VGA/DVI/S-video/Composite/Component)
Use
and
to choose and
to select.
- Swap : To switch the main-screen and sub-screen in PIP mode.
Use
and
to choose and
to select.
Summary of Contents for 2405FPW - UltraSharp - 24" LCD Monitor
Page 35: ......
Page 40: ...media Write protect switch is enabled media is unlocked Back to Contents Page ...
Page 76: ......
Page 77: ......
