Dell 210-AXVH User Manual Download Page 37

Page: 37 / 98

Setting Up the Monitor

│

Connecting the DisplayPort (DP to DP) cable

NOTE: The default out of factory setting in the UP3221Q is DP 1.4.

Connecting the Thunderbolt™ 3 Active cable

NOTE: Use the Thunderbolt™ 3 Active cable shipped with monitor only.

•

This port supports DisplayPort Alternate Mode DP1.4.

•

The Thunderbolt™ 3 power delivery compliant port (PD Version 3.0)
delivers up to 90 W of power.

•

If your notebook requires more than 90 W to operate and the battery is
drained, it may not be powered up or charged with the USB PD port of
UP3221Q.

•

Thunderbolt™ 3 is not supported on versions of Windows prior to
Windows 10.

NOTE: The UP3221Q monitor ships with a USB-C Thunderbolt™ 3
Active cable. The USB-C DP cable is not included. If you are using a
computer with USB-C DP connection, please purchase the USB-C DP
cable separately. For more information, go to:

www.dell.com/UP3221Q

Summary of Contents for 210-AXVH



































































































Search results

Summary of Contents for 210-AXVH

Reviews:

Related manuals for 210-AXVH

Brands by name

Popular brands

Dell 210-AXVH, User Manual

Search results

Summary of Contents for 210-AXVH

Reviews:

Related manuals for 210-AXVH

Brands by name

Popular brands