36
│
Setting Up the Monitor
Connecting the HDMI cable
NOTE: The default out of factory setting in the UP3221Q is HDMI 2.0. If
the monitor fails to show any content after the HDMI cable is
connected, follow the procedures below to change the settings from
HDMI 2.0 to HDMI 1.4:
•
Press the
Joystick
to activate the OSD menu.
•
Toggle the
Joystick
to highlight
Input Source
, then press the joystick to
enter the submenu.
•
Toggle the
Joystick
to highlight
HDMI
.
•
Press and hold the
Joystick
for approximately 10 seconds, and the HDMI
configuration message appears.
•
Toggle the
Joystick
to select
Yes
and change the settings.
Repeat the above steps to change the HDMI format settings if necessary.
