Rack mounting the
appliance
This section provides instructions and illustrations for rack mounting the Dell ESA 5000/7000.
The ESA 5000/ESA 7000 appliance is designed to be mounted in a standard 19-inch rack. The product packaging contains a
slide rail kit for mounting the appliance in a four-post cabinet. Before installing the appliance in an equipment rack, the
rails must be attached to the appliance and to the rack posts.
You will need the following tools and hardware for installation:
Phillips (cross head) screwdriver (#1 bit and #2 bit)
Anti-static wrist strap and conductive foam pad (recommended)
Two outer rails
Four inner rails
Crosshead threaded screws
CAUTION:
Do not use slide/rail mounted equipment as a shelf or a work space.
Summary of Contents for 1RK34-0BE
