Firmware Upgrade Procedure Dell™ Networking N2100 Series Switches
Page 11
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 44
UBI: total number of reserved PEBs: 3970
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 3/2
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 0, name "open"
UBIFS: mounted read-only
UBIFS: file system size: 4042063872 bytes (3947328 KiB, 3854 MiB, 3916 LEBs)
UBIFS: journal size: 33030144 bytes (32256 KiB, 31 MiB, 32 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 5182151 bytes (5060 KiB)
Loading file '/image2' to addr 0x70000000 with size 27624092 (0x01a5829c)...
Done
## Booting kernel from Legacy Image at 70000074 ...
Image Name: System for iproc_bri
Image Type: ARM Linux Multi-File Image (gzip compressed)
Data Size: 27623912 Bytes = 26.3 MiB
Load Address: 61008000
Entry Point: 61008000
Contents:
Image 0: 2636152 Bytes = 2.5 MiB
Image 1: 1794839 Bytes = 1.7 MiB
Image 2: 474 Bytes = 474 Bytes
Image 3: 23192424 Bytes = 22.1 MiB
Verifying Checksum ... OK
## Loading init Ramdisk from multi component Legacy Image at 70000074 ...
## Flattened Device Tree from multi component Image at 70000074
Booting using the fdt at 0x70439d58
Image is not a fdt
Continuing to boot without FDT
Uncompressing Multi-File Image ... OK
boot_prep_linux commandline: console=ttyS0,115200n8 maxcpus=2 mem=1008m envaddr=0x1C400000
root=/dev/ram mtdparts=nand_iproc.0:4m(uboot),4m(uboot-
env),2m(shmoo),4m(sys_eeprom),32m(diags),32m(onie),-(open) ubi.mtd=open quiet
Starting kernel ...
recovery_signal_init:vaddr=0xFEC00000 mapped address=0x18000000
recovery_signal_init:setting GPIO-1 to output
recovery_signal_init:writing GPIO-1 high
starting pid 1013, tty '': '/etc/init.d/rcS'
starting pid 1145, tty '/dev/ttyS0': '/etc/rc.d/rc.fastpath'
Mounting /dev/mtdblock6 at /mnt/fastpath...done.
Mounting tmpfs at /mnt/application...done.
Dell Networking Boot Options
============================
Select a menu option within 3 seconds or the Operational Code will start automatically...
1 - Start Operational Code
2 - Display Boot Menu
Select (1, 2)#
