Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Page 99 Service Manual Download

Page: 99 / 116

Template Last Updated - 2/7/2007

Speaker Assembly

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Speaker Assembly

Removing the Speaker Assembly

CAUTION:

Before you begin the following procedure, follow the safety

instructions that shipped with your computer.

Follow the instructions in "Before Working on Your Computer" on page 29.

Remove the hard-drive cover. See "Removing the Hard Drive" on page 33
for an illustration of the hard drive cover.

Remove the WLAN card (see "Removing a WLAN Card" on page 37).

Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

Remove the keyboard (see "Removing the Keyboard" on page 57).

Remove the display assembly (see "Removing the Display Assembly" on
page 65).

Remove the palm rest (see "Removing the Palm Rest" on page 79).

Remove the four M2 x 3-mm screws from the speaker assembly.

Remove the speaker assembly.

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands