Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Page 111 Service Manual Download

Page: 111 / 116

Template Last Updated - 2/7/2007

Coin-Cell Battery

111

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Coin-Cell Battery

Removing the Coin-Cell Battery

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions that shipped with your computer.

Follow the procedures in "Before Working on Your Computer" on page 29.

Remove the hard drive (see "Removing the Hard Drive" on page 33).

Remove the WLAN card (see "Removing a WLAN Card" on page 37).

Remove the fan (see "Removing the Fan" on page 41).

Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

Remove the keyboard (see "Removing the Keyboard" on page 57).

Remove the display assembly (see "Removing the Display Assembly" on
page 65).

Remove the palm rest (see "Removing the Palm Rest" on page 79).

Remove the optical drive (see "Removing the Optical Drive" on page 91).

Remove the system board (see "Removing the System Board Assembly" on
page 95).

Disconnect the coin-cell battery cable connector from the system board.

Lift the coin-cell battery from the system board.

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands