34
Dell EMC VxRail Multirack Deployment Guide
6.4
VLT validation commands
The following commands verify that the VLT connection is operational. These commands can be used to
verify any switch participating in a VLT domain.
6.4.1
show vlt all
The
show vlt all
command displays information for the configured VLT domain. The
Role
for one switch
in the VLT pair is
primary
, and its peer switch is assigned the
secondary
role. The
VLTi Link Status
and
VLT Peer status
should both be
up
.
sfo01-leaf03#
show vlt all
Domain ID : 1
Unit ID : 1
Role : primary
Version : 2.0
Local System MAC address : 54:bf:64:c7:d4:c0
Role priority : 32768
VLT MAC address : 54:bf:64:c7:d4:c0
IP address : fda5:74c8:b79e:1::1
Delay-Restore timer : 90 seconds
Peer-Routing :
Enabled
Peer-Routing-Timeout timer : 0 seconds
VLTi Link Status
port-channel1000 :
up
VLT System MAC Address Status IP Address Version
------------------------------------------------------------
2 54:bf:64:c7:e5:40
up
fda5:74c8:b79e:1::2 2.0
6.4.2
show vlt all backup-link
The
show vlt all backup-link
command displays that VLT peers are communicating on the backup
link over the OOB management network. The
Destination
is the management IP address of the peer. The
Peer HeartBeat status
must be
Up.
Note
: The
Peer HeartBeat status
must be
Up.
sfo01-leaf03#
show vlt all backup-link
VLT Backup Link
------------------------
Destination : 100.67.167.34
Peer Heartbeat status :
Up
Heartbeat interval : 30
Heartbeat timeout : 90
Destination VRF : default
