Dell EMC Unisphere 360, Installation Manual

Page: 17 / 22

2. Do one of the following:
l
At the login window, type the Unisphere Initial Setup User username and
password.
The default username for the Unisphere Initial Setup User in Unisphere 360
is
admin
and the default password is
admin
.
l
If X.509 certificate-based user authentication is configured on the server,
the Use X.509 Client Certificate checkbox is automatically selected.
3. Click Login.
Starting and stopping the Unisphere 360 server
If required to do so, you can start and stop the Unisphere 360 server manually.
Starting and stopping the Unisphere 360 server on Windows
To start or stop the Unisphere 360 server in Windows, use the Services panel. Click
Control Panel
>
Administrative Tools
>
Services to open the Services panel.
Right-click on the
EMCUnisphere360Server
service. Select Start, Stop, or
Restart, as appropriate.
Alternatively, you can use the following commands to start or stop the Windows
services using the CLI:
net start " EMCUnisphere360Server"
net stop " EMCUnisphere360Server"
Starting and stopping the Unisphere 360 server on Linux
To start or stop the Unisphere 360 server in Linux, change to this directory:
/etc/
init.d
and use the following commands:
Action Command
Start server ./unisphere360 start
Stop server ./unisphere360 stop
Restart server ./unisphere360 restart
Upgrading Unisphere 360
Note
As part of the upgrade process, you must re-enroll all Unisphere for PowerMax
instances to enhance security and system-to-system trust.
The following upgrade paths are supported:
l
V8.4.x -> V9.0.x
l
V8.3.x -> V9.0.x
l
V8.3.x -> V8.4.x
l
V8.2.x -> V8.4.x
Installing Unisphere 360
Starting and stopping the Unisphere 360 server 17