Figure 10. F900 node LCD display
Item
Button or Display
Description
1
Left
Moves the cursor back in one-step
increments
2
Select
Chooses the selected menu item
3
Right
Moves the cursor forward in one-step
increments during message scrolling:
1. · Press and hold the right button to
increase scrolling speed.
2. Release the button To stop scrolling,
release the button.
NOTE:
The display stops scrolling
when the button is released. After
45 s of inactivity, the display starts
scrolling.
4
LCD Display
Displays system information, status, and
error messages or iDRAC address
View the Home screen
The
Home
screen displays user-configurable information about the system. This screen is displayed during normal system
operation when there are no status messages or errors. When the system is off and there are no errors, the LCD enters standby
mode after five minutes of inactivity. Press any button on the LCD display to turn it on.
1. To view the
Home
screen, press one of the three navigation buttons (
Select
,
Left
, or
Right
).
2. To go to the
Home
screen from another menu, complete the following steps:
a. Press and hold the navigation button until the up arrow is displayed.
b. Go to the
Home
icon by using the up arrow.
c. On the
Home
screen, press the
Select
button to enter the main menu.
d. Select the
Home
icon.
Setup menu
NOTE:
When you select an option in the
Setup
menu, confirm the option before going to the next action.
F900 node configuration
17
